2GIG Flood and Temperature Sensor 345 MHz

The 2GIG-FT1-345 Flood and Temperature sensor is a fully supervised, tamper protected one-way 345 MHz sensor. It will monitor the ambient temperature and will detect a wet/dry flood condition. The sensor reports wet/dry conditions and temperature to your Vera Secure gateway. Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.

Sale price
Shipping calculated at checkout.

Battery-powered design runs on one CR 2.3V lithium battery
Extremely long five year battery life
345 MHz frequency

Wireless Signal Range: 275 ft. (80 m) open-air with Wireless
Control Panel
Code Outputs: Alarm; Alarm Restore; Supervisory Low Battery;
Tamper; Tamper Restore; Trouble; Trouble Restore
Transmitter Frequency: 345 MHz (crystal controlled)
Supervisory Interval: 70 minutes
Housing Material: ABS Plastic
2.92” H x 0.94” W x 0.85” D
(74.17mm H x 23.88mm W x 21.59mm)
Sensor Probe
1.31” H x 1.34” W x 0.47” D
(33.27mm H x 34.04mm W x 11.94mm)
Sensor Probe in Probe Bracket
1.46” H x 1.54” W x 0.57” D
(37.08mm H x 39.12mm W x 14.48mm D)
Cord between Sensor and Probe:
45” cord with 0.169” Diameter
(114.3cm cord) (4.29mm Diameter)